emonster tools

Japanese carpentry cut-list planner

Published

Plan stock purchases and cuts using shaku, sun, bu, ken, or metric lengths, with quantities and saw kerf. Set shaku per ken explicitly because building modules vary. Read each stock bar alongside its cutting-table row: useful pieces, saw loss and offcut share the purchased length.

Free to use. No email or account required.

Bookmark

Bookmark this tool

Save this link in your browser’s bookmarks.

Paste this link into the address of a new or existing bookmark.

On desktop, drag Japanese carpentry cut-list planner to your bookmarks bar.

Only the tool’s link is shared. Your inputs and results are not included.

Share

Share this tool

Copy this link to share this tool.

Only the tool’s link is shared. Your inputs and results are not included.

Your inputs

Edit the example inputs to match your task. Results update as you edit.

1–10 shaku (尺)
0.000001–1,000,000
0–100 mm
Cut list

Use no more than 1,000 pieces across 50 rows.

≥ 0

Calculations run in your browser. Inputs are not saved or sent to analytics.

How it works

Formula

  • Total finished length=∑(li×ni)
  • Material cost=Stock pieces required×p
  • Material yield=Total finished lengthStock pieces required×L×100
Input and formula key

Your result

Complete the inputs to see your result.

Support

Sources

Assumptions and limitations

This tool uses the carpenter’s shaku (kanejaku): one shaku is 10/33 metre; one sun is 1/10 shaku and one bu is 1/100 shaku. Set shaku per ken explicitly because building modules vary. All entered lengths use the chosen unit; kerf is always millimetres. The output is a one-dimensional stock-cutting estimate, not a structural design or a legal trade measurement.

How to use this tool

Set up the inputs

Select the length unit before entering stock length and cut-list rows. Give each finished piece its length and quantity; kerf always stays in millimetres. If using ken, specify shaku per ken for your building module. Enter the price of one stock piece in the chosen currency.

Understand the result

Read each stock bar alongside its cutting-table row: useful pieces, saw loss and offcut share the purchased length. Compare yield and boards required when changing stock size. The packing heuristic provides an estimate rather than proving the fewest possible boards.

Worked examples

  • Allow for the saw cut

    Use 9-shaku stock for four 3-shaku pieces and three 2-shaku pieces. Set the saw kerf to 3 mm. Three 3-shaku pieces fill the nominal length, so they cannot all be cut from one board with that kerf.

    The cutting plan uses 3 boards

  • Compare the theoretical fit

    Keep the same stock and pieces. Set kerf to 0 mm for comparison. One board holds 3 + 3 + 3 shaku and the other holds 3 + 2 + 2 + 2 shaku. Restore the measured kerf before ordering material.

    2 boards with zero kerf

Frequently asked questions

Which length should I enter if the ends need trimming?

Enter the usable length after allowing for damaged ends and squaring cuts. Set kerf separately for cuts that divide the usable stock into pieces. Reserve extra material for knots or defects you can only see on individual boards.

Can I enter a measured length in millimetres instead of ken?

Yes. Choose millimetres, then enter both stock and piece lengths in that unit. Use ken only if you know the shaku-per-ken convention of the drawing or building. The kerf field is always in millimetres.

Processing and privacy

The calculation or transformation runs in your browser. The tool does not send its input values or generated output to an application server. Loading a page still makes infrastructure requests; optional analytics and Google consent messages have separate controls.

Privacy Policy. Privacy & preferences in the footer controls optional analytics.

Help and feedback

Consult the linked sources for definitions and reference data. Contact Support if you have a question or notice a problem.

Read about calculation methods · Report a problem to emonster

Explore this subject: Japanese carpentry

Your privacy & preferences

Optional analytics helps us understand how emonster.tools is used. The site works normally without it. Your analytics choice is stored on this device so you can change it later; choosing not to allow analytics prevents optional measurement and removes Google Analytics cookies this site can access. Read Privacy Policy