emonster tools

Paver quantity

Published

Estimate paving pieces, packs and base-material volume from your dimensions and allowance. Choose the unit for paver dimensions and both layer depths, then supply paver length and width, waste and pack size.

Free to use. No email or account required.

Bookmark

Bookmark this tool

Save this link in your browser’s bookmarks.

Paste this link into the address of a new or existing bookmark.

On desktop, drag Paver quantity to your bookmarks bar.

Only the tool’s link is shared. Your inputs and results are not included.

Share

Share this tool

Copy this link to share this tool.

Only the tool’s link is shared. Your inputs and results are not included.

Your inputs

Edit the example inputs to match your task. Results update as you edit.

≥ 0 m²
≥ 0.000000000001
≥ 0.000000000001
0–1,000 %
1–100,000
≥ 0
≥ 0

Calculations run in your browser. Inputs are not saved or sent to analytics.

How it works

Formula

Convert all formula lengths to metres first; areas use m² and volumes use m³.

  • Required pieces=⌈Areal×w×(1+Waste or settling allowance100)⌉
  • Base layer volume=Area×Base layer depth
  • Supported input limits: : 0 ≤ x ≤ 1,000,000,000,000; : 1e-12 ≤ x ≤ 1,000,000,000,000; : 1e-12 ≤ x ≤ 1,000,000,000,000; : 0 ≤ x ≤ 1,000; : 1 ≤ x ≤ 100,000; : 0 ≤ x ≤ 1,000,000,000,000; : 0 ≤ x ≤ 1,000,000,000,000
Input and formula key

Your result

Complete the inputs to see your result.

Support

Sources

Assumptions and limitations

Area is always m²; paver sides and layer depths use the selected length unit. Waste affects paver count, not base or bedding volume. The model uses rectangular pieces and uniform layers; it does not design drainage or structural pavement.

How to use this tool

Set up the inputs

Enter the paved area in m². Choose the unit for paver dimensions and both layer depths, then supply paver length and width, waste and pack size. Base and bedding depths refer to separate layers under the paving.

Worked examples

  • Plan paving blocks and base material

    For a 12 m² patio, estimate the number of 20 cm by 10 cm pavers, add 5% for cuts and round to full packs of 50. Calculate the base material separately.

    • 12 ÷ (0.2×0.1) × 1.05 = 630; ceil(630/50) = 13; 12×0.1 = 1.2 m³

Frequently asked questions

How should I read the result from Paver quantity?

Pieces include waste; packs round up to whole purchases. Layer volumes use the entered area and depth without the paver waste percentage. The tile sample is not a laying plan and does not account for joint width, edge restraints or compaction.

Processing and privacy

The calculation or transformation runs in your browser. The tool does not send its input values or generated output to an application server. Loading a page still makes infrastructure requests; optional analytics and Google consent messages have separate controls.

Privacy Policy. Privacy & preferences in the footer controls optional analytics.

Help and feedback

Consult the linked sources for definitions and reference data. Contact Support if you have a question or notice a problem.

Read about calculation methods · Report a problem to emonster

Explore this subject: Home, crafts and workshop

Your privacy & preferences

Optional analytics helps us understand how emonster.tools is used. The site works normally without it. Your analytics choice is stored on this device so you can change it later; choosing not to allow analytics prevents optional measurement and removes Google Analytics cookies this site can access. Read Privacy Policy